Pitco Solstice CE-SE14S-SSTC Single Tank Twin Basket Electric Fryer

Pitco SE14S electric fryer with a single tank, two baskets and a large cooking area.

• Frying area 35 x 35cm
• Oil capacity 18 – 23kg
• Temperature 122°C to 193°C
• Power 17kW 3 Phase
• Dimensions W397 x D762 x H1010mm

The Pitco SE14S electric fryer has a single tank with two baskets and solid state controls including melt cycle as standard. The fryer has immersion type heating elements with high temperature alloy stainless steel sheaths.

The Pitco fryer has a deep cool zone with minimum 20% of total oil capacity to trap burnt particles, crumbs and black specks. The large 35 x 35cm cooking area allows you to cook a large quantity of fried foods for your restaurant or takeaway.

A welded tank with an extra smooth peened finish ensures easy cleaning on the SE14S. Solstice Electric fryers are designed with a fixed heating element to eliminate oil migration through pivot components. This design creates a safer working environment by keeping the hot elements in the tank where they belong.

The Solid State controller maintains the fryer temperature between 122°C and 193°C and has built-in melt cycle and boil-out capability. Temperature limit switch safely shuts off the fryer if the oil temperature exceeds the upper limit.

Drain valve interlock switch shuts disables the fryer if the drain is opened preventing accidental fires. The hermetically sealed proximity switch has no moving parts to get contaminated with grease.

Standard Equipment

Solid State Control 
Drain Valve Interlock
Baskets (Twin Size) 
Tank racks
Lift off basket hangers 
Clean out rod
9" adjustable legs 
Fryer cleaning brush
Stainless steel tank,front, door and sides.

Delivery

Free delivery on all orders over £60 (ex vat) and up to 30kg. Applies to UK mainland (UK Mainland excl. Highlands and Islands) and items held in stock only.

Orders under £60 are charged at £6.95 +VAT for delivery. All orders are dispatched with a Fast Courier Service. 

All deliveries are kerb side only by our courier partners.

Please be aware that orders may come in separate deliveries from different locations within the Cooksmill fulfilment centres.

For all queries regarding deliveries or order updates, please get in touch.

Returning items purchased online

If you purchase a stock item online that you want to return then you can send it back to us within 28 days of the sale and we will refund the value of the items that we receive back in resaleable condition.

Special orders and orders of appliances may incur restocking charges from the manufacturer. This can be up to 30%.

If there was a picking error and you received incorrect items we will arrange for a replacement.

If you receive any damaged items please email us immediately. We require images of the broken item and the packaging within 48 hours of the goods being signed for to process your claim.

Manufacturer's 1 Years Parts and Labour Warranty

All warranty is covered by the manufacturer of the equipment. Parts and labour means that an engineer from the manufacturer will attend your site. In some instances, the manufacturer may require a phone call prior to the visit to ascertain the nature of the fault.

The manufacturer will repair your equipment free of charge except in circumstances where the fault is due to misuse, operator error or failure to follow conditions of the warranty. If the fault it is found to be outside of the warranty terms you will be liable for all charges.

All gas equipment must be installed by a suitably qualified gas safe engineer. Manufacturer’s reserve the right to confirm the gas safe registration number of your installation engineer. Failure to follow correct installation will void your warranty. Gas equipment used in mobile catering may only be covered by parts only warranty.

All hard wired electrical equipment must be installed by a suitably qualified electrician. Failure to follow correct installation will void your warranty.

Please note warranty excludes consumables such as bulbs, glass, knobs etc.

All warranties are at the discretion of the manufacturer. For full manufacturer’s warranty terms and conditions please contact Cooksmill who will assist you.

Cooksmill is pleased to offer leasing in partnership with Kennet Equipment Leasing.

Leasing is available on orders over a value of £1,000 excluding VAT.

How Does Leasing Work?

Leasing is an alternative method of payment which protects your cash flow. You pay a monthly sum to Kennet Leasing instead of paying the total cost in one go. This means you can get the equipment you need now.

Is There a Tax Benefit?

All lease payments are treated as an allowable business expense and therefore attract tax relief for the full duration of the lease. Your accountant will be able to confirm this.

What Happens at The End of the Lease?

At the end of the agreement you can own the goods for one extra monthly payment.

What are The Costs?

There is a one off document cost of £130+vat with no annual service fees. Your repayments will depend on the value of the goods and how long you have been trading.