Blizzard HBC2EN 2 Door Refrigerated Prep Counter holds 6x1/3 GN not included (282 Litre)

Blizzard HBC2EN refrigerated prep counter with preparation bar for 6 x 1/3 containers and a stainless steel work area.  

• Capacity 6 x 1/3GN containers
• 1 adjustable GN1/1 shelf per door
• Temperature +2°C to +8°C
• Capacity 282 litres
• Dimensions W1360 x D700 x H1060mm

The Blizzard HBC2EN refrigerated prep counter with raised collar has capacity for 6 x 1/3 containers and has a 300mm deep stainless steel working area for preparing a large range of meals and dishes. The counter uses a ducting system to ensure cold air is evenly distributed to ensure all foods are the same temperature.

Manufactured from stainless steel both inside and out the refrigerated counter has rounded internal edges for easy cleaning and to stop food debris accumulating. Heavy duty castors are fitted as standard for easy memorability.

The counter has 1 adjustable 1/1GN shelf per door to store ingredients and pre prepared meals. Self closing doors help to stop the door being accidently left open and preserves food and the temperature inside the counter.

With the Blue Line Digital Dixell thermostat in the HBC2EN is an economic and ecological choice. The energy saving algorithm is programmed to reduce the amount of starts the compressor makes in relation to the counters use reducing energy use.

Gastronorm containers are sold separately

Technical Specifications

Cooling: Ventilated
Controller: Dixell Blue Line
Defrost: Automatic
Refrigerant: R134a
Climate Class: 4
Power Supply: 13 amp

Delivery

Free delivery on all orders over £60 (ex vat) and up to 30kg. Applies to UK mainland (UK Mainland excl. Highlands and Islands) and items held in stock only.

Orders under £60 are charged at £6.95 +VAT for delivery. All orders are dispatched with a Fast Courier Service. 

All deliveries are kerb side only by our courier partners.

Please be aware that orders may come in separate deliveries from different locations within the Cooksmill fulfilment centres.

For all queries regarding deliveries or order updates, please get in touch.

Returning items purchased online

If you purchase a stock item online that you want to return then you can send it back to us within 28 days of the sale and we will refund the value of the items that we receive back in resaleable condition.

Special orders and orders of appliances may incur restocking charges from the manufacturer. This can be up to 30%.

If there was a picking error and you received incorrect items we will arrange for a replacement.

If you receive any damaged items please email us immediately. We require images of the broken item and the packaging within 48 hours of the goods being signed for to process your claim.

Manufacturer's 2 Years Parts and Labour Warranty

All warranty is covered by the manufacturer of the equipment. Parts and labour means that an engineer from the manufacturer will attend your site. In some instances, the manufacturer may require a phone call prior to the visit to ascertain the nature of the fault.

The manufacturer will repair your equipment free of charge except in circumstances where the fault is due to misuse, operator error or failure to follow conditions of the warranty. If the fault it is found to be outside of the warranty terms you will be liable for all charges.

All gas equipment must be installed by a suitably qualified gas safe engineer. Manufacturer’s reserve the right to confirm the gas safe registration number of your installation engineer. Failure to follow correct installation will void your warranty. Gas equipment used in mobile catering may only be covered by parts only warranty.

All hard wired electrical equipment must be installed by a suitably qualified electrician. Failure to follow correct installation will void your warranty.

Please note warranty excludes consumables such as bulbs, glass, knobs etc.

All warranties are at the discretion of the manufacturer. For full manufacturer’s warranty terms and conditions please contact Cooksmill who will assist you.

Cooksmill is pleased to offer leasing in partnership with Kennet Equipment Leasing.

Leasing is available on orders over a value of £1,000 excluding VAT.

How Does Leasing Work?

Leasing is an alternative method of payment which protects your cash flow. You pay a monthly sum to Kennet Leasing instead of paying the total cost in one go. This means you can get the equipment you need now.

Is There a Tax Benefit?

All lease payments are treated as an allowable business expense and therefore attract tax relief for the full duration of the lease. Your accountant will be able to confirm this.

What Happens at The End of the Lease?

At the end of the agreement you can own the goods for one extra monthly payment.

What are The Costs?

There is a one off document cost of £130+vat with no annual service fees. Your repayments will depend on the value of the goods and how long you have been trading.